Glossary - technical terms for stucco mouldings
AXXENT
AXXENT These professional AXXENT profiles offer a complete range of cornice, wall and skirtings, from classic to modern. The products are made from Duropolymer, a polymer mixture that is shock and water resistant, manufactured with high density and is 100% recyclable. These mouldings are very hard and shock resistant and are therefore ideal for use as skirtings and mouldings for door frames. In addition, the profiles on all AXXENT mouldings are very precise and sharp-edged, providing a refined finishing touch. With the Orac AXXENT ceiling, wall and mouldings, you can give your interiors a completely new character, from modern to classy and chic. Individually or combined, the Orac AXXENT mouldings also create numerous possibilities for mood and originality as ceiling, wall or mouldings. An excellent source of inspiration. There are no limits to creativity...
BASIXX
This Orac Decor BASIXX article is a polystyrene strip of the latest production type. Thanks to DUROFOAM technology, these profiles are made from LDS polystyrene and are 100% recyclable. This production method was developed by Orac Decor in a revolutionary way. These profiles are characterized by a very innovative, young design and an exact reproduction of profile edges. The strips are pre-primed and can therefore easily be painted over with conventional ceiling or wall paints.
Fire class NMC
For the installation of nmc decorative profiles, fire classification according to DIN 4102 is not normally required, as the small quantities do not cause additional fuel to a fire. The strips can withstand heat of up to 80°C, then they begin to melt.
Fire class Orac
You will find some information on the fire classification of Orac Decor skirtings in the following PDFs, which we have made available for you to download here.
Durofoam
This quality plastic is characterized by its high density and hardness. This means that the profiles are not only extremely robust and durable, but also very light. The material is similar to high-quality Styrofoam.
Duropolymer
Duropolymer consists of a polymer with a high density. Duropolymer is therefore a very hard material from which the skirting boards and baseboards from Orac's AXXENT collection are made.
Cornice Mouldings
Cornice mouldings are decorative profiles for ceiling and wall design. They form a transition from the wall to the ceiling and can be painted in various colors. The profiles are delivered individually in a length of 2 m and must be mitred during processing. Suitable accessories for processing cornice mouldings can be found here.
Indirect lighting
Both stucco mouldings and wall lights are suitable for indirect lighting. Here the light source is integrated in or on the moulding. It is possible to install light rails or fairy lights here. Please note that the decorative mouldings in conjunction with indirect lighting should have a minimum distance of 15-20 cm from the ceiling. Installation with the help of an electrician is recommended!
HDPS
The High Definition Polymer System (HDPS) developed by NMC combines cutting-edge technology with design. Products made from this material offer the following special properties: water-repellent and moisture-resistant, the primer was specially developed for optimal painting and coating, the microcellular foam has the ideal weight-to-hardness ratio and is therefore particularly resource-efficient, high environmental compatibility: recyclable, without formaldehyde, PVC and PCB.
Kamin
Fireplaces are made of polyurethane and are screwed and glued to the wall. Please note that Orac Decor fireplaces are for decorative purposes only and must not be used in conjunction with high heat and open fires (suitable for electric fireplaces). These are pre-primed and can be painted over and are available in two different variations. Please note the assembly instructions and the technical data sheet when processing.
LUXXUS
The LUXXUS program from Orac Decor contains a unique range of luxurious creative profiles and decorative accessories for design. This complete program for a stylish overall concept from corner and wall mouldings to skirtings, lighting systems and door frames, each with that certain something. The decorative mouldings are made of the high-quality plastic Purotouch (high-quality polyurethane). This material has proven its quality and allows for smooth installation, and the motifs, decorative elements and the profile edges shown on these decorative moldings are precise and sharp-edged. A primer film is applied to the LUXXUS profile mouldings so that they can be easily painted with "quality products".
Niche / decorative elements
Niches and decorative elements are attached to the wall. Niches can be glued to the wall, but can also be set into the wall with a niche back. These are pre-primed and can be painted over and are often used in conjunction with wall and door frames. These decorative elements are made of polyurethane.
NomaBeam bars
The NMC beams from the Noma Beam collection are made of polyurethane and are available in light oak and dark oak wood look. They are processed using a special adhesive and matching processing kit. In addition to the beams, which are available in lengths of 2m, 3m and 4m, there are also matching brackets and flat profiles.
Panels / Wall and door
Panels made of rigid polyurethane foam can be used on both walls and doors. Wall or door panels are processed in a similar way to rosettes and are also painted in various colors.
Pilaster / Capital / Base
A pilaster is made up of three elements: base, shaft (flat profile) and capital. These are made of a highly compressed polyurethane and are intended for indoor use. A pilaster is similar to a half-column because it is glued to the wall. The straight shaft of a pilaster can be sawn to any height.
PS-Rigid foam
PS rigid foam is an extruded polystyrene rigid foam and has the following properties:- closed-cell rigid foam
- rotting-proof
- not very elastic
- not very moisture-resistant
PU flexibel
Depending on how they are manufactured, polyurethanes can be hard and brittle, but also soft and elastic. These mouldings are available in a flexible version, particularly suitable for curves in round rooms or for wall surface design.
PU-rigid foam
PU rigid foam stucco elements are made of polyurethane. Polyurethane is a high-quality material and has the following properties:- high wear resistance
- buckling and tear resistance
- good dynamic load-bearing capacity
- good/very good weather resistance
- good flexibility in a wide temperature range
Purotouch
Purotouch is a cast high-quality polymer based on high-density polyurethane. The Orac products in the LUXXUS collection are made of this material.
Ceiling roses / ceiling element
Ceiling roses, light frames, ceiling panels and 3D ceiling elements are decorative elements for ceiling design. These are intended for integration into the ceiling lighting. These are also pre-primed and can be painted over. When planning, please note the respective inner diameter of the ceiling roses so that there are no complications during processing.
Column / Capital / Base
A complete column is made up of three elements: base, shaft and capital. These are made of a highly compressed polyurethane that is suitable for both indoor and outdoor use and are available in a solid or solid version. If a shaft is straight throughout, it is possible to cut it to an individual height. If the shaft is curved (conical), this is unfortunately not possible. Please pay attention to the diameters of the bases, capitals and shafts when putting together your own column.
Skirtings
Skirtings are made of an extremely hard and durable material and are therefore resistant to impacts and cleaning water. Skirting boards are also sometimes available in a flexible material and can therefore also fill curves. These can also be painted over and can be designed in any color and combination you like.
Doorframes
Door surrounds are made up of profiles, pediments and decorative/corner elements. These are made of polyurethane and duropolymer and are also available in complete sets. When making your choice, please note the width of a pediment and compare the dimensions with those of your door.
Pre-primed
All trims and other decorative elements are pre-primed. This means that the surface is smooth and matte, thus providing optimal paint adhesion.
Panel mouldings
Wall and frieze moldings are profiles that are flat on the back and are preferably used to design wall panels or handrails. Depending on the design idea, these may also need to be mitred.
Wall board and console
In addition to the decorative mouldings, the manufacturers Orac and NMC offer decorative and ornamental elements for wall design. Whether simple or playful with ornaments - wall boards and consoles are easy to install using the same procedure as for niches, are pre-primed and can be painted over. NMC also offers design elements for outdoor areas with its Domostyl collection.